#8969

Portable Glass Shop  PG01B

The audio CD and the instruction manual will have you understanding and usingthe PG01B in no time. Cool new fixtures like the fast angles, reversible Squaring Fence for regular and thin art glass and a quality ruler with both metric and inch scales make the PG01B a must have for art glass enthusiasts with any Morton Surface!

#8970

Mini Surface    SS02

Work Surface  Size:    22-1/2" X 14-1/4"

#8971

Maxi Surface    LS01

Work Surface  Size:    22-1/2" X 31-3/4"

#13256

Cutting Bar     PG03

31" Bar that works with the Morton Portable Glass Shop 

#23547

Five Extra Glass Stops 

Use with your maxi or mini surface.

You can never have enough stops.

With some projects it is convenient to have extra stops with specific settings so you can cut many different size pieces with out spending time calibrating one stop continually.

#8973

Morton Layout Block System LB01

10- 6 inch L's

10- 11 inch L's and 40 push pins

Use inexpensive softboard for project layout.

Assemble up to a 16" x 26" project with each set.

#8974

Morton Layout Add-Ons LB02

4- 3 inch L's

4- 12 inch L's and 40 push pins

Use inexpensive softboard for project layout.

Combine with the Layout Block System to do larger projects.

#8975

Morton Layout Add-Ons  LB23

2- 23 inch L's and 16 push pins

Use it to expand the Layout Block System 

#8972

Morton Mr. Splash GA02 

Surround your grinder with Mr. Splash.

Combine Mr. Splash and the Mini- Surface and the grinder spray spray hits Mr. Splash and the water drips into the cells of the Mini-Surface trapping the mess and protecting your home. 

#8976

Morton Clean Cut  ZM01

The Clean Cut is a uniquely designed vise that holds the thin metals used in the outer borders of stained glass panels secure for cutting without crushing them. In addition to holding the zinc or brass secure the vise also gives saw guides for making 90-degree and 45-degree cuts.

#8434

Morton The Glass Caddy  GC01

The Glass Caddy is a great and efficient way to store your valuable glass. The rack has 15 slots that can hold up to three pieces of glass each. The size of the rack is designed for glass pieces not larger than 12" x 12". Although the rack will store up to 45 square feet of glass it will be difficult to find and remove pieces if the Glass Caddy is completely full.

#8430

Morton Grinder Tongs  GA04 

The duckbill design helps hold the glass square to the grinder head. Because the glass is held secure and square, anyone can safely and accurately grind small glass pieces without fear of cut fingers. 

#8431

Morton Cutter Caddy  CC06

The Cutter Caddy is one of those items that make working with glass more fun.One helpful function of the Caddy is how you can use it as a holding cap for your "Sharpie" pen. As you know it takes two hands to remove your"Sharpie" cap and you usually only have one hand free. The Caddy replaces the cap while you are working ony our patterns. Your pen will be easy to find and the cap easy to remove as your mark your glass.Note: Replace the pens cap when done to prevent the pen from drying out!

Six Cutter Caddies per package. Caddies are black molded plastic and work will all Morton Surfaces.

#8432

Morton Twister MT01

Use the Morton Twister to twist wire for your decorative needs. Angel halos and cowboy lassos are examples in stained glass where two copper wires aretwisted together to make a decorative effects.Twisted copper or silver wires will look great with your fused glass jewelry. The Twister can be used to create decorative borders from lead came. Start with a strip of "H" came that has been stretched straight. Stretching should be done over a table that is at least as long as the lead strip. Attach one end of the lead strip to the table and theother end to one loop eye of the Twister. Slowly twist the lead into a spiral design that can be use as a decorative border around many stained glass projects.
 

16 gauge copper wire is about the largest wire that should be used for twisting.

#8436

Morton GS Assembly Tray  PG05 

The GS Assembly tray is one of our most innovative products. The concept of assembly from a single corner allows complicated shapes to be made with ease. The ease of making triangles, pentagons, squares and rectangles with our Portable Glass Shop makes the tray easy to use and the tray makes the Glass Shop a glass crafters necessity.
The GS Assembly Tray has three pockets. Each pocket is designed to make a different geometric shape. Each pocket forms one corner of the shapes shown.

#8437

Morton Thrifty Lite Kit  TLK1

14.75" wide, 25" long and 4.5" high.

The Thrifty Lite Kit is a great way to get a quality light box on the cheap.

Comes as unfinished wood with simple assembly required. Mini Surface (SS02) and light fixture are not included.

You must purchase a light fixture for the Thrifty Lite Kit. The 25" General Electric Bright Stik and the Lights of America Model 7020 are the two options that will work with the TLK1.