Fusing Kits

We have put together two kiln kits that will get started immediately with everything you need to create fused glass projects.
 

Bullseye 90 COE Sheet Glass

We carry regular thickness (1/8") and thin (3/32") of Bullseye glass. We also stock the iridized colors. We have most of the clear and black texures with and without iridized coating. For FedEx ground shipments, we can ship up to ten sheets that are 10" x 17 1/2" in a box with a boxing charge of $5.00 per box. We can ship up to six 20" x 17 1/2" in a box with a boxing charge of $10.00 per box. These boxing charges are in addition to the shipping charge. Glass that must be shipped by common carrier will go Freight Collect unless other arrangements are made.
 

Bullseye Frit 90 COE

Bullseye Frit with a 90 COE is available in four grain sizes; Powder, Fine, Medium and Coarse. We carry one pound jars of most of Bullseye's product line and five pound jars of their most popular colors.
 

Bullseye Glass Slumping Molds

Bullseye Glass makes over 84 new and exciting molds specifically designed for slumping by professionals for professionals. These are simply the finest slumping molds we have ever found on the commercial market. Slipcast from a specially formulated clay body, they have an exceptionally smooth surface, accept kilnwash uniformly, and do not crack under repeated usage if handled properly.
 

Dragon Glass Slumping Molds

Dragon Glass makes over 72 new and exciting molds specifically designed for slumping by professionals for professionals. The molds are so unique and so much effort went into the designs, that all are copyrighted. What makes these molds different from other molds? Well, for starters the molds all have wide rims (when called for) to support glass on the edge of the mold. If you've ever slumped glass in a mold without a rim, you'll know how beneficial this is. It provides extra space to support the glass and eliminates the chance of the glass slipping off the edge of the mold and slumping unevenly. You're getting ready to fire your piece - the mold is big, you're using 2 - 3mm layers of glass and the whole thing is heavy. How do you pick it up? All Dragon Glass molds have Hand Holds cut out of the mold skirt to make picking up the piece easy. In addition to making it easy to pick up, the Hand Holds also enable more even heating of bottom of the mold. Other features? Have you ever slumped glass in a mold and found that the finished piece does not lay flat? All Dragon Glass molds have foot rings pre-cast into the mold to eliminate this problem. Uneven bottoms will never be a problem again. Your finished pieces will always lay flat. Dragon Molds also have vent holes pre-cast into the mold. Why is this important? Pre-cast vent holes are stronger than holes which are drilled into a mold after it has been fired. Stronger holes mean less chances of breaking. Drilled holes create a weak area in a mold that can cause cracks later on. What about firing speeds? All Dragon Glass molds are designed so that you can fire them at a fast rate - slow heating is not required. This enables you to fire more glass on a daily basis, reducing your costs. Whether you need round plates, square plates, oval bowls, round bowls, or special textured plates, we have a mold to suit your needs and more will be available.
 

Spectrum System 96

We carry most of regular thickness (1/8") Spectrum System 96 glass and some thin (3/32") glass. We also stock some iridized colors. For FedEx ground shipments, we can ship up to twelve sheets that are 12" x 12" in a box with a boxing charge of $5.00 per box. We can ship up to six 12" x 24" in a box with a boxing charge of $10.00 per box. These boxing charges are in addition to the shipping charge. Glass that must be shipped by common carrier will go Freight Collect unless other arrangements are made.
 

Hot Mix Fusible 90COE Glass

Hot Mix glass is a 90COE fusible glass that is imported by Hollander. We carry both 3mm and the thin 2mm thicknesses. For FedEx ground shipments, we can ship up to ten sheets that are 14" x 15" in a box with a boxing charge of $5.00 per box. For the sheets that are 7" x 10" and 8" x 10" the boxing charge is $3.00 per box. These boxing charges are in addition to the shipping charge.
 

Uroboros Fusible Sheet Glass with 90 COE

We carry regular thickness (1/8") and thin (3/32") of Uroboros glass. We have most of the clear and black texures with and without iridized coating and some colors. For FedEx ground shipments, we can ship up to ten quarter sheets in a box. Quarter sheets are cut down from full sheets and are 12" x 12" or 12" x 15" dependent upon what we have in stock. The boxing charge is $5.00 per box in addition to the shipping charge. Glass that must be shipped by common carrier will go Freight Collect unless other arrangements are made.
 

Fusing Chemicals

We carry various sizes of thin fire paper along with different thicknesses of fiber shelf paper. We also stock different shelf primers and other chemicals to assist you with your fusing projects.
 

Fusing Paints
 

Findings for Fused Pieces